Non-woven gasket table

Send

Special cushioning materials allow you to give the details of clothing the necessary shape.

Sewing without duplicate cushioning materials is indispensable. Always pay attention in the sewing instructions to the model about the type of recommended gasket and iron it precisely on the details indicated in the description. Then the product you sew will sit as it should! Burda magazine usually recommends Vlieseline ironed gaskets and is much easier to work with. Distinguish between woven and non-woven ironed pads. What kind of ironed Vlieseline pads are, what and for which fabrics are suitable and how to work with them correctly, you will learn from the table below.

A few tips for working with Vlieseline gaskets:

Parts and parts of parts marked in gray on the layout plan are subject to duplication with a gasket.
The gasket must necessarily correspond to the type of fabric.
The parts from the gasket are cut with the same direction of the shared thread as the parts from the main fabric, i.e., the arrow of the direction of the shared thread drawn on a paper pattern should be parallel to the longitudinal edge of the strip.
Parts from the gasket are cut out with allowances for the seams (2 mm narrower than the allowances for the parts of the cut from the main fabric!), And the lines of the seams and the necessary marking are transferred to the gasket.
Before ironing the gasket to the cut part, it is necessary to test on an unnecessary flap.
After ironing the gaskets, carefully lay out the cut details on the cutting table and leave it to cool for 20-30 minutes.

Photo: BurdaStyle.ru

Send