Do-it-yourself interior ottomans and unusual pillows

Send

Soft and comfortable ottomans of various shapes, unusual round pillows made of faux suede or a pillow-roller made of predatory velvet will diversify the interior and add style and mood to it.

Our interior accessories with spectacular decorative elements, a zipper with an overlap, edging and buttons, you can use as you like! By appointment - as sofa cushions or as ottomans for seating, and not quite traditionally - for example, as a stand for a laptop, magazines and other accessories.

Create home comfort: do-it-yourself cushion covers for pillows

Round pillow with elastic drawstring cover

You will need:

✽ artificial mustard or pale violet suede and calico (consumption, see the drawing);

✽ thread for sewing;

✽ elastic tape 60 cm wide 7 mm;

✽ ruler;

✽ chalk pencil;

✽ tailor pins;

✽ scissors for cutting;

✽ ruler for patchwork;

✽ centimeter tape;

✽ filler;

✽ compass

Cut

a) a large circle for the inner pillow:

1x - from faux suede

1x - from coarse calico

b) a small circle for the upper part 1x - from faux suede

c) rectangle 1x - made of artificial suede

All dimensions are in centimeters..

Step 1

To overcast all details on an overlock.

Chip the details of the inner cushion from calico and faux suede with the front sides and grind it at a distance of 1 cm, leaving an open area of approx. 10 cm for eversion.

Step 2

Unscrew the pillow, fill it with filler and sew the hole manually with a hidden stitch.

Basic Hand Stitches

Step 3

Fold the rectangle across in half with the front side inward and grind it into the ring, while leaving a 1 cm long hole at a distance of 1 cm from one of the sections to wind the elastic tape.

The ring is divided into 4 parts and put labels.

Step 4

Unscrew the slice of the rectangle sewn into the ring at the hole for screwing in the elastic tape on the wrong side by 2 cm and lay the stitch at a distance of 1.5 cm.

Step 5

Iron another cut on the wrong side by 2 cm and lay two parallel lines with a large stitch.

Edge to pick up on the lower threads.

Step 6

Divide the small circle into 4 sectors and put labels.

At a distance of 2 cm from the cut, lay down stitch stitches.

Step 7

Pin the ring with the assembly side to the small circle with the wrong side to the front side, aligning the edge with the line marked with basting stitches, and also ¼ - marks.

Distribute the assembly volume evenly.

Stitch the ring at a distance of 5 mm.

Remove threading.

Step 8

On the other side, insert an elastic band approx. 56 cm.

Chop and stitch the ends of the elastic tape.

Sew the hole in the seam manually.

Step 9

Insert the faux suede pillow up.

Done!

Do-it-yourself funny pillowcase for baby pillow

Large ottoman with zipper pouch

You will need:

✽ decorative fabric in diamonds 1.20 m wide 140 cm;

✽ zipper 40 cm long;

✽ thread for sewing;

✽ tailor pins;

✽ scissors for cutting;

✽ ruler;

✽ centimeter tape;

✽ ruler for patchwork;

✽ balls as a filler;

✽ compass

Cutting:

a) side part with a 6x fold;

b) top part 1x;

c) a small bottom part 1x;

d) large 1x bottom detail;

All dimensions are in centimeters.

Step 1

For part "a" (side part), first make the side part of the paper pattern.

To do this, fold the paper in half and place the part on the fold with the side indicated by the dotted line in the diagram.

Step 2

Lay out the side part of the paper pattern in one layer, lay on the fabric, pin it and draw it 6 times on the fabric.

Cut out the details.

Step 3

Neaten all the details.

On a small bottom part as an allowance, iron a straight cut on the wrong side to a width of 1 cm, pin the edge to the braid of the zipper and sew to the edge using a special foot for attaching the zipper.

Step 4

On a large part of the bottom, straight cut as an allowance to iron on the wrong side by 2.5 cm, pin and sew to the other braid of the zipper so that the edge covers the teeth.

Step 5

Sweep layers of fabric at the ends of the zipper.

Step 6

Fold all side parts 6 with their front sides and grind at a distance of 1 cm.

Iron the seam allowances.

Step 7

Stitch all parts from the front along the seams at a distance of 5 mm.

Step 8

Pin the upper part from above with the front side to the front side and stitch it at a distance of 1 cm.

Notch seam allowances in a circle and iron on the wrong side.

Stitch the seam from the outside to the edge.

Step 9

Stitch the bottom with the open zipper, laying a line in a circle at a distance of 1 cm.

Fill the ottoman pillow with balls.

Special offer

Oriental-style ottoman and pillow

Magazine: Catalog Burda fall-winter / 2015/2016 Pattern: 6881 Sizes: Not specified Pouf's and pillow in oriental style. You will need: Padded stool A, B and Pillow C. Shreds of fabrics of 0.4 ... 200 p. 99 p. Add to cart Padded stool and pillow in oriental style. You will need: Padded stool A, B and Pillow C. Shreds of fabrics of 0.4 ...

Floor ottom pillows with zippered covers

You will need:

✽ decorative fabric in rhombs 140 cm wide: for a small pillow - 1.30 m, for a large - 1.50 m;

✽ zipper 45 cm and 55 cm long;

✽ thread for sewing;

✽ tailor pins;

✽ spider web with a cord for edging;

✽ ruler;

✽ centimeter tape;

✽ ruler for patchwork;

✽ scissors for cutting;

✽ chalk pencil;

✽ compass;

✽ large pillow with a diameter of 55 cm and a height of 12 cm;

✽ small pillow with a diameter of 45 cm and a height of 10 cm

Cutting:

a) upper part 1x;

b) small bottom part 1x;

c) a large bottom part 1x;

d) side part 2x;

All dimensions are in centimeters.

The dimensions for the little ottoman are given in parentheses.

Step 1

Detach details.

Step 2

On a large part of the bottom, straight cut as an allowance to iron on the wrong side by 2.5 cm, pin and sew to the other braid of the zipper so that the edge covers the teeth.

Step 3

Cut out slanting inks 4 cm wide and sew into two long strips 175 cm long (145 cm for a small ottoman).

Iron the spider web with the edging cord.

Step 4

Pin each edge and stitch it to the upper and lower parts of the pouf (put the ends of the piping one on top of the other), while the thickened part of the pip lies on the part, and the open sections are aligned with the slices of the puff.

Step 5

Stitch the side part into the ring at a distance of 1 cm.

Iron seam allowances.

Step 6

Stitch the side part to the upper and lower parts with the front side to the front side at a distance of 1 cm (the zipper is open at the same time).

Remove pouffe case.

Unusual cover for a square floor pillow

Pillow cushion with zipper cover

You will need:

✽ velvet with leopard print;

✽ buttons covered in velvet with mustard color;

✽ ready edging of mustard color;

(flow rate, see drawing);

✽ zipper 40 cm long;

✽ calico;

✽ filler;

✽ ruler for patchwork;

✽ scissors for cutting;

✽ ruler;

✽ centimeter tape;

✽ thread for sewing;

✽ tailor pins;

✽ manual needle for sewing;

✽ chalk pencil;

✽ compass

Cutting:

a) rectangle of velvet 1x

b) side part:

2x velvet

2x calico

All dimensions are given in cm.

Step 1

Neaten all the details.

Fold the rectangle with the front side inwards and grind, as shown in the figure, not reaching the labels for sewing the zipper 1 cm.

Iron the seam allowances, and iron the seam allowances along the cuts on the seamy side.

Step 2

Pin and fasten the zipper in the center under the edges of the cut, and then grind it at a distance of 5 mm using the special foot of the sewing machine to sew the zippers.

Step 3

Pin the edging to both side parts (put the ends of the piping one on top of the other), while the thickened portion of the piping lies on the part, and the open sections are aligned with the section of the part.

Step 4

Chop the side parts of coarse calico with the details with the edging on the wrong sides and grind at a distance of 1 cm, leaving the open section of the seam to fill.

Loose the resulting side parts with filler.