Ideas and descriptions of how to make and decorate cases for glasses with your own hands.
1. Semicircular glasses cases with contrast lining
For each cover, cut the same details from the main fabric and the lining fabric in the shape of a circle with a cut out piece (see photo below). Strengthen the parts with adhesive. Fold the parts with their faces inward and sew them, leaving a hole for turning out. Turn out, sew in a hole, fold in half and sew.
Photo: akailochiclife.com
Felt cosmetic bag with embroidery: master class + pattern
2. Case for glasses made of genuine or artificial leather
For such a cover, a sufficiently dense, able to keep in shape leather and suede, natural or artificial, is suitable. Templates for covers of 2 types can be downloaded here. Cut out a part of a cover and a strip for a fastener. Sew the cover on the sides. Cut the holes for the strap, thread the strap through them and sew.
Photo: thelittleststudio.com
DIY thermal cup holder: 9 ideas
3. Soft case for glasses with embroidery
First embroider. Then fasten the part with an adhesive pad. Tuck the upper edge inward and hem, leaving the drawstring. Then fold the cover in half and sew on both sides. Twist and thread the drawstring.
Photo: aliceandlois.com
Felt cosmetic bag with embroidery: master class + pattern
4.Crochet Glasses Case
If you crochet, it will not be difficult for you to knit such a case with your own hands. It is better to take not too thin, voluminous yarn or a thin knitted lace.
Photo: rescuedpawdesigns.com
How to decorate a phone case: 10 ideas with instructions
5. Knitted glasses case
If you prefer knitting, making such a cover will not take you much time. Take voluminous yarn and thick knitting needles, a pattern is at your discretion, but it is better dense, not openwork and not too voluminous. Detail of the case - a square, folded three times and sewn on the sides.
Photo: handsoccupied.com
DIY felt tablet case: workshop
6. Case for glasses made of felt in the form of a donut
Cut a round part and beige felt and cut a small round hole in the middle. And pink felt, cut out the “glaze” part, also with a hole in the middle. Embroidery in colored floss. Connect the parts using a double-sided adhesive pad., Fold the cover in half and glue or sew along the semicircular edge by 2/3, leaving a 1/3 hole.
Photo: akailochiclife.com
From the old new: cosmetic bag from old jeans
7. Suede eyeglass case with applique
For such a cover you need natural suede and leather for application. Print out the image of the glasses and use it as a template to cut out the detail of the applique. From suede, cut out 2 rectangular parts for the cover. Glue the applique to one of the parts. Wait until the glue dries (if desired, you can stitch the application). Fold the details of the cover inside out and sew on 3 sides, leaving one short side open.
Photo: gina-michele.com
Leather interchangeable strap for the bag: master class
8. Simple leather case for glasses
For such a cover, thick genuine leather is suitable. Cut out the cover part as shown in the photo below. Punch holes and sew the cover with a lace, tying knots at the beginning and end of the seam.
Photo: instructables.com
9. Quilted case for glasses
In this project, the plain fabric was first painted with universal acrylic paints: they give the fabric greater density and water-repellent properties. Then, from the main fabric, lining fabric and adhesive-based pads, 2 identical parts are cut out. Glue the gasket parts to the main parts and quilting. For all parts, round the corners on the side of the entrance to the cover. Fold the main parts with the details of the lining face to face and lay 2 parallel lines along the rounded sides. Cut the allowances on the rounded side by cutting out the triangles. Twist and stitch the rounded edge. Fold the parts with the front sides inward, sew on 3 sides, cut the corners and process the edges with a zigzag or overlock. Turn out a cover and iron.
Photo: thirtyhandmadedays.com
Brocade cosmetic bag
10. Glasses case, decorated with confetti
So you can update or make interesting ready-made hard case. You will need confetti from thin paper, glue and varnish for decoupage. Degrease the cover, if desired, cover with a layer of paint. Then stick the confetti one by one so that the circles overlap each other. When the glue dries, cover the cover with varnish.
Photo: mypoppet.com.au
