Open this funny little book of red felt on any page, and you will find there a variety of needles - for sewing, beadwork, embroidery ... The needle bed is the beginning for any beautiful creative story!
Open the needle book case
• From Jeff ytex rigid gasket:
- 2 parts of 7 x 13 cm
- 1 piece 1 x 13 cm
• Printed fabric (including cut allowances):
- 2 parts of 20 x 15 cm
• From felt:
- 2 parts of 12 x 10 cm
• 2 pieces of thin braid 20 cm long
Do-it-yourself unusual needle ring-ring
Step 1
Place the three parts of the Jeff ytex gasket on the wrong side of the printed fabric outer part and glue them. In this case, between the gasket parts, it is necessary to leave a small distance to their thickness so that the bookcase closes freely.
Needle Book Case Diagram
Step 2
Unscrew the sections of the outer part and glue over the Jeff ytex gasket parts, first at the corners, and then along the perimeter. Sew the braid at the cross marks.
Step 3
On the front side of the inner part of the fabric with print, put two parts of felt and stitch in the center, like pages in a book.
Do-it-yourself needlewheel on the wrist
Step 4
Unscrew the sections of the inner part and iron on the wrong side around the perimeter so that the dimensions of the inner and outer parts coincide.
Step 5
Sew the outer and inner parts of the fabric manually with hidden stitches.
Source and photo: Burda special. Home Studio / 2016
