How to make trims of sleeves with stalemate

Send

The double-breasted jacket, model 110 from Burda 12/2017, has slats with pats on the sleeves. Such a decorative effect creates the illusion of cuffs that are fixed with pats fastened with buttons.

Most often, stitches are found as a classic decorative element of the good old trench. But this piece of clothing in some models also carries a functional load, for example, in shirts with the help of a patch it is easy to change the length of the sleeve to ¾ or even to a short one.

In our case, the stitches fix the straps of the sleeves and play a decorative role. From our master class you will learn how to make trims of sleeves with stalemate in a double-breasted jacket.

Jacket pattern

Special offer

Raglan Double Breasted Jacket

Magazine: Burda 12/2017 Pattern: 110 Sizes: 36 - 44. A relaxed fit and slightly shiny fabric turn a double-breasted jacket with raglan sleeves into a unique ... 200 р. 99 р. Add to cart A laid-back cut and slightly shiny fabric turn a double-breasted jacket with raglan sleeves into a ...

Step 1

Fold each bar of the sleeve with the front side inwards, grind short sections. Iron seam allowances. Pin the strap to the bottom of the sleeve with the front side to the front side (in this model, reference mark 9), aligning the seam of the strap with the bottom seam of the sleeve.

Step 2

Stitch the bar.Fold the bar along the wrong side inwards, sweep the lower edge and iron it.

How to properly carve seam allowances: workshop

Step 3

Fold each stitch of the sleeve along in half along the front side inwards, grind longitudinal and short sections on one side.

Cut the seam allowances close to the line, at the corners - obliquely. To turn out a patu and to iron.

We reveal the secret of a sharp corner on BurdaStyle.ru

Step 4

Pin the open end of the stitch to the inner slice of the strap between the transverse marks and stitch.

Sew the inner slice of the placket manually with loose stitches. Unscrew the lower edge of the plank up to a width of 10 cm as a lapel, unscrew the heel on the front side. Sew a button to the end of the stitch at a distance of 1.5 cm, securing the sleeve.