Fashion mosaic

Many different shreds at the wave of your hand will merge into one beautiful whole!

• 
• 
• 

TEMPTATION
The combination of amazing patterns and transparent fabric is amazing at first sight!
YOU WILL NEED: dress made of fabric with a pattern, matching color patches of colored fabrics.

HOW TO MAKE: see also the step-by-step illustrated instructions for a blouse (pictured below).
On scraps of fabric, iron allowances on the seamy side, pin on the front, while we folded the edges on some scraps of fabric. Sweep the flaps and then scribble to the edge. Additionally cut a strip of approx. 2.35 m and a width of 14 cm. Fold the plank in half with the front side inward. Stitch the edges to a width of 1 cm. On the long side, leave a hole for turning out in the seam. Unscrew and iron the bar, sew the hole in the seam.
From the fabric flap, cut a belt 150 cm long and 20 cm wide. Place a belt on the dress horizontally at the height of the waist, combining the lines of the middle of the dress and the belt. At the same time, tuck the upper and lower edges 5 cm wide and chop from one side seam to the other. The ends from the side seams should be left free to tie.
Lay the cleaned-up strap (as shown in the photo of the model) in the form of a loop, put it under the lower edge of the belt and pin it. Stitch the edges of the belt to the edge.
Tip: if you don’t have a mannequin, pull the dress on the ironing board. In the bust area, place the right amount of cotton for stuffing.


BLUE ANGEL
Do you like the blue gamma? In one model, you can collect all its shades.
YOU WILL NEED: a blouse, rags of fabric, tailor and ordinary scissors, threads, pins.
STEP 1 Rags of fabric with different patterns, copy on photo paper format A3.



STEP 2 Place the blouse on the mannequin. Pin the fabric copies and fit them to the shape without cutting the blouse.
STEP 3 Mark on the blouse with the marker with disappearing paint the exact location of the flaps of fabrics. Remove the paper patterns, lay them on the fabric and cut the parts with a 1 cm allowance. Iron allowances on the wrong side. Paste the prepared patches onto the blouse, then sew on the edge. Tip: if you don’t have a mannequin, pull the blouse on the ironing board. In the bust area, place the right amount of cotton for stuffing.
Photo: Jan Schmidel (6), Stefan Knauer (3), design: Alexandra Melakhrinos. Model by Anna Sui